- 1 What are the 6 types of construction drawings?
- 2 How do I learn to read blueprints?
- 3 How do you read work drawings?
- 4 How many types of construction drawings are there?
- 5 Who prepares construction drawings?
- 6 Is it hard to read blueprints?
- 7 What are blueprints called now?
- 8 How do you read CAD drawings?
- 9 How do you read a site plan?
- 10 How do you read drawing symbols?
- 11 What is the definition of scale when reading a drawing?
- 12 What is Plan profile?
- 13 What is a profile grade line?
What are the 6 types of construction drawings?
Below are the different types of construction drawings.
- 1 Architectural Drawings: This is one of the types of construction drawings.
- Structural Drawings:
- Electrical Drawings:
- Plumbing and Sanitary Drawings:
- Finishing Drawing:
How do I learn to read blueprints?
4 Tips for Reading Blueprints
- Begin with the title block. The title block is the first piece of information you’ll see in construction site plans.
- Study the plan legend.
- Find the blueprint’s scale and orientation.
- Look for notes from the architect.
How do you read work drawings?
Drawing Scale Construction plans ( blueprints ) are scaled down representations of the final project at a ratio of the actual size. For example, 1/8″ = 1′ (one eighth inch equals one foot). When construction plans are scaled, it helps to put the part into a print size drawing that is easily read by the crew.
How many types of construction drawings are there?
Different types of drawings is used in construction such as architectural drawings, structural, electrical, plumbing and finishing drawings. These drawings provides layout plans and details for construction of each and every part of the building.
Who prepares construction drawings?
As-Built Drawings: As-Built Drawings are typically prepared by the contractor. They are more like interpolations done for construction purposes. On the original construction documents and drawings, the as-built changes are made by the contractor in red ink.
Is it hard to read blueprints?
All construction professionals, regardless of whether they are working in the field or in the office, must know how to read blueprints. Blueprint reading is not terribly difficult but it does require practice and some basic knowledge of blueprints.
What are blueprints called now?
Are Blueprints Still Being Used? Blueprints are still being used to this day. However, they are no longer blue and aren’t called blueprints. They are now referred to as drawings or plans.
How do you read CAD drawings?
How to Read CAD House Plan Drawings
- Look at the legend. The legend or key, usually located near the lower right-hand corner of the drawing, should explain all of the symbols on the drawing.
- Look at the title block.
- Read the notes.
- Pay attention to lines.
How do you read a site plan?
Tips on How to Read a Site Plan
- Find The Title Block. In the bottom right corner of most plans, you’ll find what’s called a title block.
- Learn the Plan’s Scale.
- Determine the Orientation of the Plan.
- Know the Datum Point.
- Note the Site’s Contours.
- Locate Existing Structures.
How do you read drawing symbols?
They are often in the bottom right-hand corner of the drawing /part. Information Blocks
- The name and address of the company who produced/ owns the drawings.
- The part number and description.
- General tolerances.
- Projection details.
What is the definition of scale when reading a drawing?
A drawing that shows a real object with accurate sizes reduced or enlarged by a certain amount (called the scale ). The scale is shown as the length in the drawing, then a colon (“:”), then the matching length on the real thing.
What is Plan profile?
The plan and profile sheet is a type of engineering drawing, traditionally prepared in CAD, that combines a plan view, a map that targets a linear feature such as a levee, road, or channel, with a profile view, an XY plot of the elevation of the targeted linear feature.
What is a profile grade line?
The profile grade line moves either up or down to accomodate superelevation with axis of rotation applied. Subassemblies that are used between the pivot point and the baseline raise or lower the profile grade line to accomodate the pivot point.